![]() |
ROD firmware
1.0.5
ATLAS l1-calo - ROD_eFEX and ROD_jFEX firmware for the L1Calo ROD board
|
Components | |
| channel_fifo | <Entity channel_fifo> |
| backplane_regs | <Entity backplane_regs> |
| ttc_chan_regs | <Entity ttc_chan_regs> |
| chan_map_ila | |
Signals | |
| ipbw | ipb_wbus_array ( N_SLAVES- 1 downto 0 ) |
| ipbr | ipb_rbus_array ( N_SLAVES- 1 downto 0 ) |
| chan_enable_i | STD_LOGIC_VECTOR ( 23 DOWNTO 0 ) |
| first_chan_i | STD_LOGIC_VECTOR ( 4 DOWNTO 0 ) |
| last_chan_i | STD_LOGIC_VECTOR ( 4 DOWNTO 0 ) |
| tob_fifo_busy_threshold | STD_LOGIC_VECTOR ( 31 downto 0 ) |
| bulk_fifo_busy_threshold | STD_LOGIC_VECTOR ( 31 downto 0 ) |
| tob_fifo_xoff_threshold | STD_LOGIC_VECTOR ( 31 downto 0 ) |
| bulk_fifo_xoff_threshold | STD_LOGIC_VECTOR ( 31 downto 0 ) |
| time_count | STD_LOGIC_VECTOR ( 31 downto 0 ) |
| bp_reg_reset | std_logic |
| backplane_control_i | STD_LOGIC_VECTOR ( 31 downto 0 ) |
| chan_disable | STD_LOGIC_VECTOR ( 31 downto 0 ) |
| channel_busy | STD_LOGIC_VECTOR ( 23 downto 0 ) |
| TTC_CRC_ignore_i | std_logic |
| det_spec_evnt_sel_i | std_logic_vector ( 3 downto 0 ) |
| header_sequence_i | std_logic_vector ( 11 downto 0 ) |
| header_type_i | std_logic_vector ( 3 downto 0 ) |
| event_sel_i | std_logic_vector ( 1 downto 0 ) |
| ttc_ignore_i | std_logic |
| TTC_fifo_rst_i | std_logic |
| BCN_adjustment_i | std_logic_vector ( 11 downto 0 ) |
| l1id_continuity_control_i | std_logic_vector ( 31 downto 0 ) |
| timeout_threshold_i | std_logic_vector ( 31 downto 0 ) |
| event_sel_dummy | std_logic |
Definition at line 1080 of file input_fifos.vhd.
1.9.1